Support > FTS-P200
Broadband Mode Installation Guide
1. Connect the WAN Port of FTS–P200 to your DSL, Cable,
DirectTV or Wireless Modem/Router with an Ethernet Cable.
2. Optional: Connect the LAN Port of FTS–P200 to the
Ethernet Port of your computer with an Ethernet Cable if you
have a computer.
3. Plug the Power Cord into the DC Connector of FTS–P200 and
an Electrical Outlet. This step will turn on the FTS–P200.
4. Important: You must wait at least five minutes before
using your phone and do not turn off the FTS–P200 during the
first ten minutes. Also, you do not need to unplug FTS–P200
when it is not in use.
Analog Dialup Mode: Do not connect anything
to the LINE Port. If you want to use the Analog Dialup Mode,
please refer to the FTS–P200 Installation Guide - Analog
Dialup Mode.
![SupraLink Solutions [ Internet Solutions Provider ]](/graphics/partners/supralink.png)
![sslONE™ Corporation [ Making security affordable ]](/graphics/partners/sslone.png)
![Solutions Network [ Technology Solutions Provider ]](/graphics/partners/solutions.png)