|
|
|
Support > FTS-P200
Dialup Mode Installation Guide |
|
|
 |
1. Connect the LINE Port of FTS–P200 to your Wall Phone Jack
(your regular home Telephone Line or office Telephone Line)
with any regular Telephone Cable. |
2. Plug the Power Cord into the DC Connector of FTS–P200 and
an Electrical Outlet. This step will turn on the FTS–P200. |
|
3. Important: You must wait at least five minutes before
using your phone and do not turn off the FTS–P200 during the
first ten minutes. Also, you do not need to unplug FTS–P200
when it is not in use. |
|
 |
|
Broadband Mode: Do not connect anything to
the WAN and LAN Ports of FTS–P200. If you want to use the
Broadband Mode, please refer to the FTS–P200 Installation
Guide - Broadband Mode. |
|
|
![SupraLink Solutions [ Internet Solutions Provider ]](/graphics/partners/supralink.png)
![sslONE™ Corporation [ Making security affordable ]](/graphics/partners/sslone.png)
![Solutions Network [ Technology Solutions Provider ]](/graphics/partners/solutions.png)