Thank you for purchasing the FreeTEL System FTS-W100 WiFi IP Phone. The
FTS-W100 WiFi IP Phone is a revolutionary device that expands the reach of
VoIP communications. It provides consumers a new cost effective way to
communicate, with great features such as 3-way Calling, Call Waiting, Call
Transfer and many popular features. The FTS-W100 WiFi IP Phone supports
popular audio codecs. It is based on SIP industry standard and interoperable
with any FreeTEL System VoIP devices, thus enabling you to fully leverage the
benefits of VoIP technology, while visually commuting with anyone, anywhere
in world.
1. GETTING STARTED
2.1 Switch the Phone On/Off
Press and hold the power key
.
The phone will display the power-on/off animation. If the Power on Code
function is active, after switching on the phone, enter the security code
(with each input displayed as *) and press the left soft key
(OK).
If correct, the power-on animation will be displayed; otherwise Code Error
will be displayed.
2.2 Make a Call
Prior to making or receiving calls, the phone must be connected to a wireless
Access Point (AP) and registered with the FreeTEL Network Service.
2.2.1 Key in a FreeTEL Phone Number. To delete the character or digit
to the left of the cursor, press the right soft key
(Clear).
To move the cursor, press
.
To delete all the numbers or characters, press and hold the right soft key
(Clear).
2.2.2 Press
to
call the FreeTEL Phone Number. “Connecting...” will be displayed. To
cancel the call attempt, press the right soft key
(Cancel).
A time display of 00:00:00 will appear. You can also press the
key to cancel the call; the phone will return to standby mode.
2.2.3 When the call is connected, the call timer is displayed.
2.2.4 To end the call, press the right soft key
(Hang
up) or the key
.
2.3 Use Speed Dial
If you have assigned a FreeTEL Phone Number to one of the speed dial keys
~
, you can quickly call that FreeTEL Phone Number:
2.3.1 In standby mode, press and hold the corresponding speed dial key
to automatically display the FreeTEL Phone Number.
2.3.2 Press
to
call the FreeTEL Phone Number.
2.4 Answer a Call
2.4.1 If the Answer Mode is set to Talk Key, presses the left
soft key
(Answer)
or the key
to
answer an incoming call.
2.4.2 If the Answer Mode is set to Any Key, press any key to
answer an incoming call except the right soft key
,
the key
or
the key
.
2.4.3 When there is an incoming call, you may press
to
stop the vibration or ring alert without picking up the call.
2.4.4 To end an ongoing call, press the right soft key
(Hang
up) or the key
.
2.5 Reject a Call
2.5.1 When there is an incoming call, press the right soft key
(Hang
up) or the key
to
reject the call.
2.5.2 If you press the right soft key
(Hang
up) to reject an incoming call, the call duration 00:00:00 will be
displayed.
2.5.3 When there are missed calls (excluding rejected calls), the
number of missed calls will be displayed, for example Missed Log 3. In
this case, press the left soft key
(View)
to enter the missed call log (Missed Log).
2.6 In Call Operations
While on a call, you can perform the following operations:
2.6.1 Hold a Call
You can place an ongoing call temporarily on hold. During a call, press the
left soft key
(Option),
and then press the left soft key
(OK)
to select Hold.
|
► |
To take the call off hold, press the left soft key
(Option),
and then press the left soft key
(OK)
to select Unhold. |
|
► |
To end the held call, press the right soft key
(Hang
up) or the key
. |
2.6.2 Call Waiting
If the Call Waiting function is activated, when another call comes in during
a call, the earpiece will sound a waiting tone.
|
► |
To reject the incoming third party call and continue the current call, press
the right soft key
(Hang
up). |
|
► |
To hold the current call and answer the incoming third party call, press the
left soft key
(Answer). |
After answering the third party call, you can perform the following
operations:
|
► |
Press the left soft key
(Option).
Press
to highlight Swap and press the left soft key
(OK)
to switch between the current call and the held call. |
|
► |
Press the left soft key
(Option).
Press
to highlight End Back Call and press the left soft key
(OK)
to end the held call. |
|
► |
Press the right soft key
(Hang
up) to end the current call. Then, you can press the left soft key
(Option)
and select Unhold to take the held call off hold. |
|
► |
Press the key
to
end both calls. |
2.6.3 Make a New Call
While on a call, if you need to connect to a third party, press the left soft
key
(Option). Press
to highlight New Call and press the left soft key
(OK).
Key in the third party’s FreeTEL Phone Number, and then press the left soft
key
(OK) or the key
.
When the connection succeeds, you can start the call with the third party.
The original call will be placed on hold. The following operations are
available:
|
► |
Press the left soft key
(Option).
Press
to highlight Conference and press the left soft key
(OK)
to initiate a conference call. |
|
► |
Press
to highlight Mute and press the left soft key
(OK)
to mute the microphone. |
|
► |
Press the left soft key
(Option).
Press
to highlight End Back Call and press the left soft key
(OK)
to end the held call. |
|
► |
Press the right soft key
(Hang
up) to end the current call. Then, you can press the left soft key
(Option)
and select Unhold to take the held call off hold. |
|
► |
Press the key
to
end both calls. |
2.6.4 Conference Call
If the Three Way Call function is active, after making a new call with the
original call on hold, you can make a conference call with both parties.
Press the left soft key
(Option).
Press
to highlight Conference and press the left soft key
(OK)
to initiate the conference call.
|
► |
To end one of the calls during the conference call, press the left soft key
(Option).
Press
to highlight Drop and press the left soft key
(OK).
Press
to highlight the desired party, and press the left soft key
(OK)
to end the call with the selected party. |
|
► |
To end the conference call, pressing the right soft key
(Hang
up) or the key
will end both calls. |
2.6.5 Transfer a Call
If the Call Transfer function is activated, you can transfer an
ongoing call to another FreeTEL Phone Number.
During a call, press the left soft key
(Option).
Press
to highlight Blind or Consult and press the left soft key
(OK).
Key in the transfer FreeTEL Phone Number and press the left soft key
(OK).
|
► |
If Blind is selected, the call will be directly transferred to the
dialed FreeTEL Phone Number after the connection succeeds. |
|
► |
If Consult is selected, after the transferred-to party answers the
call, announce the transfer. Then, press the left soft key
(Transfer)
to transfer the intended call. |
|
► |
The Blind option is selectable only when the Call Transfer
function is set to Blind or Blind & Consult; the Consult option
is selectable only when the Call Transfer function is set to
Consult or Blind & Consult. |
2.6.6 Mute the Microphone Volume
During a call, press the left soft key
(Option).
Press
to highlight Mute and press the left soft key
(OK).
The microphone volume will be set to mute. To resume the volume press the
left soft key (Option). Press
to highlight Unmute and press the left soft key
(OK).
2.6.7 Access the Phonebook
While on a call, press
to access the phonebook entry list.
|
► |
When you press
to access the phonebook, the last phonebook entry will be highlighted; when
you press
to access the phonebook, the first entry will be highlighted. |
|
► |
After entering the phonebook, press
to scroll through the entries. Press the left soft key
(Details)
to check the details (name, phone number and group) for the highlighted
entry. |
|
► |
In the phonebook entry list, Press
~
to enter the first letter(s)/digit(s) of the desired entry (name). All names
starting with these letter(s)/digit(s) will be displayed. |
Note: If there are no entries in the phonebook, when you press
,
the error tone will sound.
2.6.8 Adjust the Listening Volume
|
► |
During a call, press
to access the listening volume adjustment screen. |
|
► |
There are six volume levels. Press
to increase or to
decrease the volume. If the volume is at the highest level, the volume level
will not change when
is pressed; if the volume is at the lowest level, the volume level will not
change when
is pressed. |
|
► |
After completing the volume selection, press the right soft key
(Exit)
or wait for two seconds to return to the call timer mode. The phone will save
the adjusted volume level. |
2.7 Store a FreeTEL Phone Number
In standby mode, new entries can be added to the phonebook.
2.7.1 Enter the desired phone number and press the left soft key
(Save).
2.7.2 Enter the name according to the prompts and press the left soft
key
(OK).
2.7.3 Press
to highlight the desired group for this phone number and press the left soft
key
(OK) to complete the operation.
Note: The FreeTEL Phone Number and name of the newly added record cannot be
identical to those of an existing record. Otherwise, the text Exists will be
displayed after you enter the name and press the left soft key
(OK).
2.8 Call Log Shortcut
In standby mode, you can quickly view the call logs: outgoing call log (Dialed
Log), received call log (Received Log) and missed call log (Missed
Log).
2.8.1 Press
to
display the latest outgoing call. Press
to scroll through other outgoing call records.
2.8.2 Press
to display the latest received call. Press
to scroll through other received call records.
2.8.3 Press
to display the latest missed call. Press
to scroll through other missed call records.
After the intended record is displayed, you can press
to
call the number. To perform other operations with the record, press the left
soft key
(Option).
2.9 Custom Functions Shortcut
2.9.1 In standby mode, press
to access the custom functions menu.
2.9.2 Press
to highlight the desired option: WiFi (1), Network (2),
Scheme (3), Calculator (4) or Calendar (5), and then press
the left soft key
(OK)
to access the option. You can also access an option by pressing its
corresponding number key.
2.10 Current Profile Shortcut
In standby mode, press
to access the menu of the current profile. Press
to highlight the desired option, and then press the left soft key
(OK)
to access the option.
2.11 Vibration Shortcut
In standby mode, press and hold
to
set the ring mode for incoming calls and alarms to vibration, and set the
keypad tone and alert tone to Off.
will be displayed.
Press and hold
again to resume ring mode, keypad tone and alert tone in the current profile.
The indicator corresponding to the current profile’s ring mode will be
displayed.
2.12 Keypad Lock
The keypad lock prevents the keys from being accidentally pressed, resulting
in unintentional operations.
2.12.1 In standby mode, press and hold
to
lock the keypad. The indicator
will be displayed.
2.12.2 To unlock the keypad, press and hold
again in standby mode.
2.12.3 When the keypad is locked, you can answer a call as usual.
During the call, you can operate the phone normally. However, the keypad will
automatically lock when the call ends, or if the call is rejected.
2.12.4 When the keypad is locked, even if the Backlight is not set to
Off, the LCD screen and keypad will not light when keys are pressed.
4.1 Call Log – Menu è Call Log
Your phone records missed, received and dialed calls as well as their call
durations. In standby mode, you can press
,
or
to quickly access Missed Log, Received Log or Dialed Log.
4.1.1 Missed Log – Menu è
Call Log è
Missed Log
This option enables you to view the last 20 missed calls. After you access
this option, the phone will display the information of the most recent missed
call Missed 1: the caller’s FreeTEL Phone Number or name (if the
number is stored in the phonebook). Press
to view other missed calls. When viewing a log, you can dial the caller’s
phone number by pressing
.
When a call log is displayed, press the left soft key
(Option).
The following options will be available:
4.1.1.1 Edit – After you access this option, the caller’s phone number
will be displayed. You can edit the phone number, and then save or dial the
edited number:
|
► |
Save Number – After editing the number, press the left soft key
(Save).
Key in the name and press the left soft key
(OK).
Press to highlight the desired group category, and then press the left soft
key
(OK) to complete the operation. |
|
► |
Dial Number – After editing the number, press
to
call the displayed number. |
Note: If No Caller ID is shown in the log, when you select Edit,
Number Error will be displayed. When you are saving the number, the
phone number and name cannot be identical to those of an existing phone book
entry. Otherwise, the text Exists will be displayed after you enter
the name and press the left soft key
(OK).
4.1.1.2 Time – Select this option to view the time the call came in.
4.1.1.3 Delete – When you access this option, “Delete?” will be
displayed. Press the left soft key
(OK)
to complete the deletion.
4.1.2 Received Log – Menu è
Call Log è
Received Log
This option enables you to view the last 20 received calls. After you access
this option, the phone will display the information of the most recently
received call Received 1: the caller’s phone number or name (if the
number is stored in the phonebook). Press
to view other received calls. Note: This function only works in networks that support Caller ID service;
otherwise No Caller ID will be displayed in the received log. If the
caller’s phone is set to block the caller’s number, No Caller ID will
also be displayed.
When viewing a log, you can dial the caller’s phone number by pressing
.
When a call log is displayed, press the left soft key
(Option).
The following options will be available:
4.1.2.1 Edit – After you access this option, the caller’s FreeTEL
Phone Number will be displayed. You can edit the FreeTEL Phone Number, and
then save or dial the edited number.
4.1.2.2 Time – Select this option to view the time the call came in.
4.1.2.3 Delete – When you access this option, “Delete?” will be
displayed. Press the left soft key
(OK)
to complete the deletion.
4.1.2.4 Duration – Select this option to view the duration of the
received call.
4.1.3 Dialed Log – Menu è
Call Log è
Dialed Log
This option enables you to view the last 20 dialed calls. After you access
this option, the phone will display the information of the most recent
outgoing call Dialed 1: the dialed phone number or name (if the number
is stored in the phonebook). Press
to view other outgoing calls. Note: If you dial a number that has been recorded in the Dialed Log, the
phone will update the log after the call ends.
When viewing a log, you can call the dialed FreeTEL Phone Number by pressing
.
When a call log is displayed, press the left soft key
(Option).
The following options will be available:
4.1.3.1 Edit – After you access this option, the dialed phone number
will be displayed. You can edit the phone number, and then save or dial the
edited number:
|
► |
Save Number –
After editing the number, press the left soft key
(Save).
Key in the name and press the left soft key
(OK).
Press
to highlight the desired group category, and then press the left soft key
(OK)
to complete the operation. Note: The phone number and name cannot be identical to those of an existing
phone book entry. Otherwise, the text Exists will be displayed after
you enter the name and press the left soft key
(OK). |
|
► |
Dial Number –
After editing the number, press to call the displayed number. |
4.1.3.2 Time – Select this option to view the time the call was
dialed.
4.1.3.3 Delete – When you access this option, “Delete?” will be
displayed. Press the left soft key
(OK)
to complete the deletion.
4.1.3.4 Duration – Select this option to view the duration of the
dialed call.
4.1.4 Delete Log – Menu è
Call Log è
Delete Log
This option enables you to delete all missed calls, received calls, dialed
calls, or to delete all.
4.1.4.1 If you select Missed Log, Received Log or
Dialed Log, the text “Delete?” will be displayed. Press the left
soft key
(OK)
to complete the deletion.
4.1.4.2 If Delete All is selected, follow the prompts to enter
the security code and press the left soft key
(OK)
to delete all the call logs. If the security code is incorrect, Code Error
will be displayed.
4.1.5 Duration – Menu è
Call Log è
Duration
This option enables you to view the approximate duration of received calls,
dialed calls, or the duration of all calls. After accessing this option,
press
to view the duration of received calls (Received), dialed calls (Dialed),
as well as the duration of all calls (Total Time). The time will be
displayed in “h:mm:ss” format. To clear the timer, press the left soft key
(Reset).
The text “Reset?” will be displayed. Press the left soft key
(OK)
to complete the operation.
4.2 Profiles – Menu è
Profiles
This submenu enables you to customize the phone alert settings to suit a
variety of environments. When you access this submenu, the profile list will
be displayed; the current profile will be highlighted. You can customize each
profile, and activate the one that suits your environment. The phone will
utilize all the current profile’s settings. Standard is the
factory-preset profile.
4.2.1 Standard – Menu è
Profiles è
Standard
4.2.1.1 Enable – Menu è Profiles
è Standard è
Enable
Select this option to activate the selected profile.
4.2.1.2 Set – Menu è Profiles
è Standard è Set
This option enables you to change the selected profile’s settings, including:
|
► |
Ring Volume – Select this option to adjust the ring volume level for
incoming calls and the alarm clock. There are two volume levels: High
and Low. Press
to reach the desired volume level, and press the left soft key
(OK)
to complete the operation. |
|
► |
Ring Mode – This function enables you to define how the phone will
notify you of incoming calls. The available options include: Ringing,
Vibration and Mute. Press
to reach the desired ring mode, and press the left soft key
(OK)
to complete the operation. |
|
► |
Ring Tone – This option enables you to select a special ring tone for
incoming calls. Press
to scroll through the ring tones and listen to a sample of each. After
highlighting the desired ring tone, press the left soft key
(OK)
to complete the operation. |
|
► |
Alarm Tone – This option enables you to select an alarm tone for the
alarm clock. Press
to scroll through the alarm tones and listen to a sample of each. A
highlighting the desired alarm tone, press the left soft key
(OK)
to complete the operation. |
|
► |
Keypad Tone – If this function is activated, when you press any key,
the phone will sound a tone. When an operation on the phone is completed or
fails, the respective success/failure tone will sound. Select On or
Off to activate or deactivate this function. |
|
► |
Alert Tone – If this function is activated, a warning tone will sound
when the battery power is low. Select On or Off to activate or
deactivate this function. |
4.2.2 Meeting – Menu è
Profiles è
Meeting
This profile is suitable for meeting environments. You can preset this option
to meet your needs by following the same steps specified in “Standard”.
4.2.3 Outdoor – Menu è
Profiles è
Outdoor
This profile is suitable for outdoor environments. You can preset this option
to meet your needs by following the same steps specified in “Standard”.
4.2.4 User Define – Menu è
Profiles è
User Define
This profile can be tailored for other environments. You can preset this
option to meet your needs by following the same steps specified in
“Standard”.
4.3 Settings – Menu è Settings
From this submenu, you can perform various phone settings.
4.3.1 Scheme – Menu è Settings
è Scheme
After accessing this option, you can select from the following options:
4.3.1.1 Static Picture
The standby display will become static after you set this option. After this
option is selected, its current setting will be highlighted. To customize a
text and display it in standby mode, select User-defined; to select
and display a picture in standby mode, select from the options
Photograph1~Photograph24.
|
► |
If User-defined is selected, enter up to or 12 alphanumeric characters and
then press the left soft key
(OK)
to complete the operation. |
|
► |
If one of the options Photograph1~Photograph24 is selected, the
corresponding picture will be displayed. You can
press to browse through other pictures. When the desired picture is
displayed, press the left soft key
(OK)
to complete the operation. |
|
► |
Change Preview – Select this option to preview the current setting for
Every Hour. You can press the left soft key
(Replay)
to re-preview the pictures or text. |
4.3.1.2 Every Hour
The standby display will change every hour in a 24-hour cycle after you set
this option. When this option is accessed, these options will be available:
|
► |
Default – The standby display will change every hour in the default
picture sequence after you select this option. |
|
► |
User Edit – This option enables you to specify the picture or text for
each hour (Picture1~Picture24). Select from the options
Picture1~Picture24, and then edit text or select a picture by following
the same operations specified in “Static Picture”. Default pictures will
remain for unedited options. |
|
► |
Change Preview – Select this option to preview the current setting for
Every Hour. You can press the left soft key
(Replay)
to re-preview the pictures or text. |
4.3.1.3 Every 3 Hours
The standby display will change every three hours in a 24-hour cycle after
you set this option. Follow the same operations specified in “Every Hour”.
4.3.1.4 Every Day
The standby display will change every day in a 7-day cycle after you set this
option. Follow the same operations specified in “Every Hour”.
4.3.2 Date/Time – Menu è
Settings è
Date/Time
This option enables you to set the phone’s date and time. After accessing the
option, enter a date from 2004-01-01 to 2019-12-31, and then enter the time
in the corresponding time format. Press the left soft key
(OK)
to complete the operation. When you key in the date or time, you can press to
move the cursor and modify the number.
4.3.3 Answer Mode – Menu è
Settings è
Answer Mode
This option enables you to select how to answer an incoming call. After you
access this option, the following will be available:
4.3.3.1 Any Key
Press any key to answer an incoming call except the right soft key
,
the key
and the key
.
4.3.3.2 Talk Key
Press the left soft key
(Answer)
or the key
to
answer an incoming call.
4.3.4 Language – Menu è
Settings è Language
This option enables you to select the language of the phone’s text display.
4.3.5 Display – Menu è
Settings è Display
You may set the display for the LCD screen as follows:
4.3.5.1 Backlight – Menu è Settings è
Display è Backlight
If the Backlight is not set to Off, the LCD screen and keypad will
light when you press keys or the phone receives a call. The following options
are available:
|
► |
Off: Select this option to deactivate the backlight. |
|
► |
Battery Saving: In this mode, the backlight will last for 5 seconds
after the last keystroke. |
|
► |
Normal: In this mode, the backlight will last for 15 seconds after the
last keystroke. |
4.3.5.2 Contrast – Menu è Settings è
Display è Contrast
This option enables you to specify the contrast level for the LCD screen.
There are six contrast levels. Press
to increase or to
decrease the contrast. The screen display will reflect the contrast setting.
After reaching the desired contrast level, press the left soft key
(OK)
to complete the operation.
4.3.5.3 Screen Saver – Menu è Settings è
Display è Screen Saver
If the Screen Saver is not set to Off, the clock screen saver will be
displayed after the phone has been in standby mode for one minute. The screen
saver will disappear when you press keys. The following options are
available:
|
► |
Digital Mode: In this mode, the screen saver will display a digital
clock. |
|
► |
Analog Mode: In this mode, the screen saver will display an analog
clock. |
|
► |
Off: Select this option to deactivate the Screen Saver function. |
4.3.5.4 On/Off Animation – Menu è Settings è
Display è On/Off Animation
This option enables you to select the power-on/off animation. Select one
of the options Animation 1 ~ Animation 4; the corresponding animation
will be displayed. Press the left soft key
(OK)
to complete the operation.
4.3.6 Set Security – Menu è
Settings è Set Security
This password protected option enables you to set the security level to
protect your phone from unauthorized use. After accessing this option, you
will be prompted to enter the user definable security code (i.e. password).
Key in the security code and press the left soft key
(OK).
If correct, the following options will be available (otherwise Code Error
will be displayed): Note: The initial default security code is “888888”.
4.3.6.1 Power On Code
If this function is active; the security code will need to be entered each
time you switch on the phone. After accessing this option, select On
or Off to activate or deactivate.
4.3.6.2 Change Code
Select this option to change the security code. Observe the following
steps:
1. When New Code is displayed, enter a new security code (0~6
digits long, using numbers 0~9), and then press the left soft key
(OK).
Confirm Code will be displayed.
2. Enter the new security code again and press the left soft key
(OK)
to complete the operation.
|
► |
The security code is “888888” by default |
|
► |
If the new security code entered in step 2 is different from that entered in
step 1, when you press the left soft key
(OK),
Not Matched will be displayed |
|
► |
To avoid any inconvenience, please remember the new security code. |
4.3.6.3 Reset All
Select this option to restore your phone’s default settings. When you
access this option, “Reset All?” will be displayed. Press the left
soft key
(OK)
to complete the operation. This operation will not delete the phonebook
entries or call logs. It cannot change the phone’s date and time either.
Phone Default Settings
| Functions |
Default Settings |
|
Profiles |
Standard |
|
Listening Volume |
3 |
|
Call Log (Duration) |
0:00:00 |
|
Speed Dial Setting |
Unset |
|
Phonebook Group (Ring Tone) |
Ring 5 |
|
Security Code |
888888 |
|
Power On Code |
Off |
|
Scheme |
Static Picture |
|
Scheme (Static Picture) |
Photograph1 |
|
Scheme (User-defined) |
(Blank) |
|
Answer Mode |
Talk Key |
|
Language |
English |
|
Backlight |
Battery Saving |
|
Contrast |
3 |
|
Screen Saver |
Digital Mode |
|
On/Off Animation |
Animation 3 |
|
Alarm (On/Off) |
Off |
|
Alarm (Set Time) |
08:00 |
|
Alarm (Snooze) |
Off |
|
Time Format |
24 Hour |
Profiles Default Settings
| Profile Options |
Standard |
Meeting |
Outdoor |
User Define |
|
Ring Volume |
High |
Low |
High |
High |
|
Ring Mode |
Ringing |
Vibration |
Ringing |
Ringing |
|
Ring Tone |
Ring 6 |
Ring 6 |
Ring 6 |
Ring |
|
Alarm Tone |
Ring 3 |
Ring 3 |
Ring 3 |
Ring |
|
Keypad Tone |
Off |
Off |
Off |
Off |
|
Alert Tone |
On |
Off |
On |
On |
4.4 Tools
From this submenu, you can use the Calculator, view the Calendar, set the
Alarm, change the current Time Zone, enable DST (Daylight Saving Time) or set
Time Format.
4.4.1 Calculator – Tools è
Calculator
This function enables you to add, subtract, multiply and divide.
1. The screen will initially display the number “0”. Enter the first
number to be calculated. - To enter a minus sign, press
(only the first number can be made negative); to enter a decimal point, press
.
2. Press
,
,
or
to enter the plus, minus, multiplication or division signs respectively.
3. Enter the second number. - To enter “0”, press
and
;
“0.0” will be displayed
4. Press
to
display the calculation result. - To conduct further calculations from this
result, repeat steps 2~4
5. When starting a new calculation, if the result from the last
calculation is not “0”, press the right soft key
(Clear)
to initialize.
|
► |
To delete the character you just entered, press the right soft key
(Clear);
to erase all entered characters, press and hold the right soft key
(Clear). |
|
► |
A maximum of 9 digits (including minus sign and decimal point) can be entered
at one time. |
|
► |
If the formula violates mathematical principles (for example, 5/0), Error
will be displayed. |
|
► |
If the absolute value of the calculation result exceeds 999,999,999,
Overflow will be displayed. |
4.4.2 Calendar – Tools è
Calendar
This function enables you to view the calendar from January 1, 2004 to
December 31, 2021. After accessing this option, you can press
to highlight the desired date.
4.4.3 Alarm – Tools è
Alarm
This function enables you to set the alarm for a specified time. Once
activated, the alarm indicator
will be displayed.
|
► |
When the preset alarm time expires, the phone will sound the alarm; an alarm
icon and the current time will be displayed. The alarm will sound for 30
seconds unless dismissed. |
|
► |
To dismiss the alarm and return to standby mode, press any key. |
|
► |
If the alarm time expires during a call, the alarm will not sound. |
You can set the alarm function by observing the following operations:
4.4.3.1 On/Off – Tools è Alarm è
On/Off
After accessing this option, select On or Off to activate or
deactivate the alarm function.
4.4.3.2 Set Time – Tools è Alarm è
Set Time
Select this option to set the alarm time. Enter the time in 24-hour time
format, and then press the left soft key
(OK)
to complete the operation.
|
► |
When you key in the time, you can press
to move the cursor and modify the number. |
|
► |
The cursor will advance if the number entered is valid; otherwise, the phone
will sound an error tone (if the Keypad Tone is set to On). |
4.4.3.3 Snooze – Tools è Alarm è
Snooze
If this function is activated, the alarm will repeat 3 times at 5-minute
intervals after the original alarm time expires. You can select On or
Off to activate or deactivate this function.
4.4.4 Time Zone – Tools è
Time Zone
This function enables you to change the current time zone. After you access
this option, some cities (time zones) and their time differences will be
displayed; the current time zone will be highlighted. Press
to highlight the desired time zone, and then press the left soft key
(OK)
to set it as the current time zone. The phone’s time will change accordingly.
4.4.5 DST Setting – Tools è
DST Setting
This function enables you to activate or deactivate Daylight Saving Time
(DST). After accessing this option, select On or Off to
activate or deactivate the DST function.
4.4.6 Time Format – Tools è
Time Format
This option enables you to set the time format. After accessing this option,
select 12 Hour or 24 Hour.
4.5 WiFi-Settings – Menu è
WiFi-Settings
From this submenu, you can perform the following WiFi settings.
Note: After completing WiFi settings, switch the phone off and then on,
to apply the changed WiFi settings.
4.5.1 Net Search – WiFi-Settings è
Net Search
This option enables you to search available AP’s (10 maximum) for the phone.
AP’s can be defined and saved using the Net Search feature if AP’s have
broadcast turned on and the phone is within their ranges. After selecting
this option, the phone will start to search for AP’s. Available AP’s will be
listed according to the signal strength. The strongest AP’s SSID will be
highlighted at the top of the list. Those with no lock icon next to the name
are open AP’s; those with a lock icon (
or 
) are protected AP’s and you will need to supply their WEP keys or WPA-PSK’s
to access them. Press
to highlight the desired SSID, and press the left soft key
(Save).
Press
to highlight the desired AP profile, and press the left soft key
(Save)
to save the SSID to the AP profile. You can then follow the prompt to set the
security mode and/or the encryption code (WEP key or WPA-PSK) and activate
the AP profile. For detailed operations, refer to “AP Profile”. Note:
When the phone is connecting to an AP, you can press the right soft key
(Search)
to start the search for available AP’s. If the desired AP has broadcast
turned off, the AP can be entered directly through a series of keystrokes on
your handset. Refer to “AP Profile”.
4.5.2 WiFi Config – WiFi-Settings è
WiFi Config
From this option, you can perform the following WiFi
configuration:
4.5.2.1 AP Profile – WiFi-Settings è WiFi
Config è AP Profile
This option enables you to set up to four AP (Access Point) profiles.
Each time you switch on the phone, the phone will try to connect to one of
these AP’s according to their respective profile settings. After you select
this option, the AP profile list will be displayed. If the security mode of
an AP profile is set to WEP Key, the icon
will be displayed in front of the AP profile. If the security mode is set to
WPA-PSK, the icon
will be displayed in front of the AP profile. If the security mode is set to
Open AP, no icon will be displayed in front of the AP profile. Press
to highlight the desired AP profile, and then press the left soft key
(OK).
The following options will be available:
|
► |
SSID – This option enables you to save an AP’s SSID to the AP profile.
After accessing this option, enter the SSID (32 alphanumeric characters
maximum), and then press the left soft key
(OK)
to complete the operation. |
|
► |
Security Mode – This option enables you to set the security mode for
the AP profile. After accessing this option, select Open AP, WEP
KEY or WPA-PSK: |
|
|
► |
If WEP KEY is selected, the phone will then display the options of WEP
Key Info (refer to “WEP Key Info”). |
|
|
► |
If WPA-PSK is selected, the phone will then display the PSK-editing
screen (refer to “WPA-PSK Info”). |
|
► |
WEP Key Info – If the AP profile’s security mode is set to WEP Key,
select this option to set the WEP key. After accessing this option, observe
the following operations: |
|
|
1. |
Select Auth. Method, and then select the authentication method:
Open Key or Shared Key. |
|
|
2. |
Select 64bit or 128bit according to the AP’s WEP key setting. Enter the WEP
key that the AP used, and press the left soft key
(OK). |
|
|
|
► If 64bit is selected, ensure that the WEP key consists of
five ASCII characters or ten hexadecimal characters. |
|
|
|
► If 128bit is selected, ensure that the WEP key consists of 13
ASCII characters or 26 hexadecimal characters. |
|
|
3. |
Select WEP Key Index. Enter the WEP key index (1-4), and then press
the left soft key
(OK). |
|
|
Note: The WEP key setting may be different due to AP settings. If an
AP supports only a fixed hexadecimal WEP key, you should enter the same WEP
key in the phone. If an AP supports both ASCII and hexadecimal WEP keys, you
can enter either the ASCII WEP key or the hexadecimal WEP key in the phone. |
|
► |
WPA-PSK Info – If the AP profile’s security mode is set to WPA-PSK,
select this option to set the WPA-PSK key. After accessing this option, enter
the WPA-PSK key and press the left soft key
(OK)
to complete the operation. Ensure that the WPA-PSK key consists of 8-63 ASCII
characters or 64 hexadecimal characters. |
|
► |
Activate – Select this option to connect to the AP according to the AP
profile setting. If the connection fails, the phone will try to connect to
other AP profiles’ AP’s. If the phone fails to connect to all these AP’s and
the Auto Scan function is active, the phone will try to search and connect to
another available open AP. Refer to “Auto Scan”. |
4.5.2.2 Auto Scan – WiFi-Settings è WiFi
Config è Auto Scan
If the Auto Scan function is active, when the phone is switched on and fails
to connect to the AP’s specified in “AP Profile”, the phone will do a scan
for available AP’s and try to connect to one open AP of these scanned AP’s.
After accessing this option, select Enable or Disable to
activate or deactivate the Auto Scan function. Note: If the phone
fails to connect to all the specified and scanned AP’s, the phone will
periodically retry AP connections. If the phone fails to register with the
service network after the AP connection, the phone will prompt you to try
another AP.
4.5.3 Web Configuration
A PC browser can be used as an alternative to configuring AP profile and
network information via the handset. Ensure that the PC is connected to the
same AP as the phone.
1. Enter the phone's IP address in the address bar of the PC's web
browser and press <Enter>.
2. Follow screen prompts to enter the user name (“user”) and password
(the phone’s security code), and then click <OK>.
The WiFi Web Server Management window will be displayed:
3. Click USER MENU, and then you can select:
Local Network Config: To view the phone’s network status and perform
network configuration
Wireless AP Config: To configure the phone’s AP profiles
Generic Information: To view the phone’s generic information
User Settings: To configure the phone’s user settings
SIP and RTP Config: To perform SIP and RTP configurations
Codec and DTMF: To configure the codec and DTMF
STUN Config: To perform STUN configurations
4. After configuring the desired parameters, click <submit> and
then click <REBOOT> to initiate and save the configurations.
4.5.4 Network Parameter – WiFi-Settings è
Network Parameter
This option enables you to set network parameters:
4.5.4.1 DHCP – WiFi-Settings è Network
Parameter è DHCP
If the DHCP function is active, the phone will obtain an IP address
automatically from the DHCP server. After accessing this option, select
Disable or Enable to disable or enable DHCP.
4.5.4.2 IP – WiFi-Settings è Network
Parameter è IP
This option enables you to perform IP settings. Note: Only when DHCP
is disabled, can the IP option be available. Otherwise, when you
select this option, Please disable DHCP will be displayed.
|
► |
IP Address – Select this option to set the phone’s IP address. After
accessing this option, key in the IP address, and press the left soft key
(OK)
to complete the operation. |
|
► |
Subnet Mask – Select this option to set the subnet mask. After
accessing this option, key in the subnet mask, and press the left soft key
(OK)
to complete the operation. |
|
► |
Gateway IP Address – Select this option to set the gateway IP address.
After accessing this option, key in the gateway IP address, and press the
left soft key
(OK)
to complete the operation. |
4.5.4.3 DNS – WiFi-Settings è Network
Parameter è DNS
This option enables you to perform DNS settings.
|
► |
Primary DNS Server IP Address – Select this option to set the IP
address of the local primary DNS server. After accessing this option, key in
the IP address, and press the left soft key
(OK)
to complete the operation. |
|
► |
Secondary DNS Server IP Address – Select this option to set the IP
address of the local secondary DNS server. After accessing this option, key
in the IP address, and press the left soft key
(OK)
to complete the operation. |
|
► |
Priority – Select this option to set the priority. You can select DHCP
First or Local First. |
4.5.4.4 Network Information – WiFi-Settings è
Network Parameter è Network Information
Select this option to view the network information. Press
to browse through the phone’s IP Address, Subnet Mask,
Gateway IP Address, MAC Address, Connected SSID and DNS
Address.
4.5.5 Signal Protocol – WiFi-Settings è
Signal Protocol
From this option, you can set signal protocols:
4.5.5.1 SIP – WiFi-Settings è Signal
Protocol è SIP
This option enables you to set the SIP protocol. The following options are
available:
|
► |
SIP Register Server Mode – Select this option to set the SIP register
server mode. After accessing this option, you can select IP or DNS. |
|
► |
SIP Register Server Domain Name – Select this option to set the SIP
register server domain name. After accessing this option, enter the domain
name, and press the left soft key
(OK)
to complete the operation. |
|
► |
SIP Register Server IP Address – Select this option to set the SIP
register server IP address. After accessing this option, key in the IP
address, and press the left soft key
(OK)
to complete the operation. |
|
► |
SIP Register Server Port – Select this option to set the SIP register
server port. After accessing this option, key in the port number, and press
the left soft key
(OK)
to complete the operation. |
|
► |
SIP Outbound Proxy – Select this option to set the SIP outbound proxy.
After accessing this option, you can select IP or DNS. |
|
► |
SIP Outbound Server Domain Name – Select this option to set the SIP
outbound server domain name. After accessing this option, enter the domain
name, and press the left soft key
(OK)
to complete the operation. |
|
► |
SIP Outbound Server IP Address – Select this option to set the SIP
outbound server IP address. After accessing this option, key in the IP
address, and press the left soft key
(OK)
to complete the operation. |
|
► |
SIP Outbound Server Port – Select this option to set the SIP outbound
server port. After accessing this option, key in the port number, and press
the left soft key
(OK)
to complete the operation. |
|
|
SIP User Name – Select this option to set the SIP user name. After
accessing this option, enter the user name (1~32 alphanumeric characters),
and press the left soft key
(OK)
to complete the operation. |
|
|
SIP Authentication String – Select this option to set the SIP
authentication string. After accessing this option, enter the authentication
string, and press the left soft key
(OK)
to complete the operation. |
|
|
SIP Password – Select this option to set the SIP password. After
accessing this option, follow the prompt to enter the security code and press
the left soft key
(OK).
Enter the SIP password (0~32 alphanumeric characters), and press the left
soft key
(OK)
to complete the operation. |
4.5.5.2 RTP – WiFi-Settings è Signal
Protocol è RTP
Select this option to set the RTP protocol. After you access this option, the
RTP Port option will be displayed. RTP Port – This option
enables you to set the RTP port. After accessing this option, key in the RTP
port number (10000~20000), and press the left soft key
(OK)
to complete the operation. The port number should range from 10000 to 20000;
otherwise Illegal input will be displayed.
4.5.5.3 NAT – WiFi-Settings è Signal
Protocol è NAT
Select this option to set the NAT protocol. After you access this option, the
STUN option will be displayed:
|
► |
STUN – This option enables you to set the STUN protocol: |
|
► |
Server Name – Select this option to set the STUN server name. After
accessing this option, key in the STUN server name, and press the left soft
key
(OK)
to complete the operation. |
|
► |
Server Port – Select this option to set the STUN server port. After
accessing this option, key in the STUN server port number, and press the left
soft key
(OK)
to complete the operation. |
|
|
On/Off – Select On or Off to activate or deactivate the
STUN function. |
4.5.5.4 Voice Mail – WiFi-Settings è Signal
Protocol è Voice Mail
This option enables you to perform voice mail settings. After you access this
option, the Voice Mail Access Number option will be displayed.
Voice Mail Access Number – Select this option to set the voice
mail access number. After accessing this option, key in the access number,
and press the left soft key
(OK)
to complete the operation.
4.6 Network Service
From this submenu, you can set the following network services:
4.6.1 Call Waiting – Network Service è
Call Waiting
This option enables you to set the Call Waiting function.
4.6.1.1 Per Call Basis – Network Service è
Call Waiting è Per Call Basis
Select Enable or Disable to activate or deactivate the per call
basis Call Waiting function.
4.6.2 Call Transfer – Network Service è
Call Transfer
If the call transfer function is active, you can transfer an ongoing call to
another phone number. Refer to “Transfer a Call”. After you access this
option, the following will be available:
4.6.2.1 Disable – Network Service è Call
Transfer è Disable
Select this option to disable the call transfer function.
4.6.2.2 Blind – Network Service è Call
Transfer è Blind
If this option is selected, you can directly transfer an ongoing call to
another phone number after the connection succeeds.
4.6.2.3 Consult – Network Service è Call
Transfer è Consult
If this option is selected, you need to announce the transfer after the
transferred-to party answers your call. Then, press the left soft key
(Transfer)
to transfer the intended call.
4.6.2.4 Blind & Consult – Network Service è
Call Transfer è Blind & Consult
Select this option to activate both Blind and Consult Call Transfer
functions.
4.6.3 Three Way Call – Network Service è
Three Way Call
If the Three Way Call function is active, you can make a conference call with
two parties (refer to “Conference Call”). After accessing this option, select
Enable or Disable to activate or deactivate the Three Way Call
function.
4.6.4 Register Interval Time – Network Service è
Register Interval Time
This option enables you to set the register interval time. After accessing
this option, enter the interval time (0~86400 seconds), and then press the
left soft key
(OK)
to complete the operation.
4.6.5 Caller-ID Block – Network Service è
Caller-ID Block
If this function is active, when you make a call, your phone number will not
be displayed on the called party’s phone. After accessing this option, select
On or Off to activate or deactivate this function.
4.6.6 Repeat Dial on Busy – Network Service è
Repeat Dial on Busy
If this function is active, the phone will enable you to select to
automatically redial the last busy number that you tried to dial. After
accessing this option, select On or Off to activate or
deactivate this function.
4.6.7 Reject Anonymous Incoming Call – Network
Service è Reject Anonymous Incoming Call
If this function is active, the phone will automatically reject anonymous
incoming calls. After accessing this option, elect On or Off to
activate or deactivate this function.
4.6.8 Personal Information – Network Service è
Personal Information
To set a caller ID name for the phone. After accessing this option, enter the
caller ID and press the left soft key
(OK)
to complete the operation.
4.7 MISC
From this submenu, you can perform the following operations:
4.7.1 Vendor Information – MISC è
Vendor Information
Select this option to view the vendor information. Press
to highlight the desired option: Vendor Name, Enterprise Code,
Model Name and Version, and then press the left soft key
(OK)
to view the corresponding information.
4.7.2 PC Config – MISC è
PC Config
This option enables you to download WiFi setting parameters from a PC to the
phone; when the operation is complete, restart the phone.
4.7.3 Remote TFTP Update – MISC è
Remote TFTP Update
This option enables you to perform remote TFTP update. After you select this
option, the phone will display a notice for the remote TFTP update. Press
to browse through the information. Press the left soft key
(Update)
to initiate the remote TFTP update process. Note: The phone will spend
a long time completing the remote TFTP update. Please do not unplug the
battery; when the update operation is complete, restart the phone.
4.7.4 Remote TFTP Server – MISC è
Remote TFTP Server
This option enables you to set the remote TFTP server. After accessing
this option, key in the domain name of the remote TFTP server, and press the
left soft key
(OK)
to complete the operation.
4.7.5 Local TFTP Update – MISC è
Local TFTP Update
This option enables you to perform local TFTP update. After accessing this
option, follow the prompt to enter the security code and press the left soft
key
(OK).
The phone will display a notice for the local TFTP update. Press
to browse through the information. Press the left soft key
(Update)
to initiate the local TFTP update process. Note: The phone will spend
a long time completing the local TFTP update. Please do not unplug the
battery; when the update operation is complete, restart the phone.
4.7.6 Local Log – MISC è
Local Log
Select this option to view the phone’s status information (for example,
network connection, SIP messages). This information will be useful when
troubleshooting a problem. After accessing this option, press the left soft
key
(Next)
to browse through items.
4.7.7 Web Authentication – MISC è
Web Authentication
Set this option when you use the phone in an area that requires web
authentication. After you access this option, the following will be
available:
4.7.7.1 Set Address: Select this option to set the effective URL for
script download. After accessing this option, key in the URL, and press the
left soft key
(OK)
to complete the operation
4.7.7.2 Download Script: Select this option to initiate script
download.
|
► |
Script files may be different due to authentication methods. You may need to
download script files each time you perform web authentication for a
different area. |
|
► |
For detailed information, contact the area’s network administrator. |
4.7.7.3 Log In: Select this option to log in and follow the
prompt to enter the corresponding user name and password.
will be displayed.
Means the Ring Mode is set to Vibration. If you press and hold the
vibration shortcut key
Indicates the Alarm function is active.
Indicates the battery charge level. A higher bar is a greater battery power.
will flash continuously, and the phone will sound a low battery alarm (if the
alert tone is set to On), reminding you that the battery is running
low and the phone will be switched off automatically. To charge the battery,
follow the steps below:
.
If the phone is off, the text Charging is also displayed on the LCD
screen.
Press
the “Up”, “Down”, “Left”, and “Right” directions on the
Navigation key to execute operations such as browsing,
selecting, adjusting and setup; key directions are as
follows:
~
~
). As you input letters, the phone will automatically associate the matched
English words - If the letter input does not correspond with any English word
in the phone’s dictionary, this key press will have no response.
will be displayed at the lower left corner of the screen.
?![SupraLink Solutions [ Internet Solutions Provider ]](/graphics/partners/supralink.png)
![sslONE™ Corporation [ Making security affordable ]](/graphics/partners/sslone.png)
![Solutions Network [ Technology Solutions Provider ]](/graphics/partners/solutions.png)